Seawind 1600 Owner's Manual page 47

A. MANUAL OVERRIDE – depress the HOUSE control knob and turn clockwise towards the
"Man On" (GREEN) position or counter clockwise towards the "Man Off" (RED) position.
NOTE: the HOUSE control switch is located on the main bulkhead and is accessible by removing
the saloon settee backrest.
SYSTEM SHUTDOWN
To shut down the system:
1. Select "System OFF" from the C-Zone display
2. Press and hold button No.1 for 3 seconds to turn the main battery off.
To completely shut down the system including all power supply, continue on to steps 3 and 4:
3. Turn off the circuit breakers for solar panels system.
4. Disconnect any shore power supply leads
SWITCHING
Equipment can be switched both on and off by selecting the "Control" page from the C-Zone
main menu. The desired item from the C-Zone display, chart plotter or I-Pad (with C-Zone App)
can then be selected and switched on or off.
To bypass the digital system circuits can be manually overridden by removing the circuits fuse
and inserting into the neighboring override slot on the Combination Output Interface
(distribution module) located on the main bulkhead under the Nav table and behind the settee
backrest.
B&G Plotter
C-zone display I-Pad