Helm Stations - Instruments - Seawind 1600 Owner's Manual

P a g e | 19
To hook up to a mooring:
• Prepare the bridle by fitting the eye splice of one mooring line to each bow cleat.
• Slowly approach the mooring until it is directly under the forebeam
• Hook the mooring and pull up to the beam
• Feed the bitter end of one bridle line through the eye and drop the mooring back into
the water
• Tie off the bitter end of the bridle to the same cleat as it's splice is attached
• The boat is now secure, repeat this process for the opposite bow
• Adjust the bridle lengths accordingly to stabilize the boat

3.8 HELM STATIONS - INSTRUMENTS

Your helm station is equipped with the following instruments with their operation explained in
the manufacturer's manuals.
A. Multifunction chart plotter/radar screen.
B. Nav Instruments displaying, wind, direction, rudder angle, heading, speed, depth
C. Engine ignition and instrumentation
D. Compass
E. Port engine and throttle/gear levers
F. STBD engine and throttle/gear levers
G. 12V power outlet for search light and other powered devices
H. Controls for central winch
The position of your dual helm stations has been designed to maximize your visibility. Always
control your vessel from the most visible vantage point for the particular maneuver you are
attempting.