Installation Procedure Overview - NETGEAR PS113 Installation Manual

Introduction
your computers. Setup is easy—if you follow the instructions in this guide, the print server will
soon be up and running for your computers.
If you have problems, there is a troubleshooting section on page 12 to help you. You can get
more detailed troubleshooting information from the Reference Manual on the CD or online at
www.NETGEAR.com in our Support section.

Installation Procedure Overview

Estimated time: 30 minutes
1. Unpack the box and verify the contents
2. Connect the print server to a printer and to the network.
3. Configure the print server to be recognized on the network.
4. Configure each computer to print through the print server.
Note: You only need to go through procedures 1 through 3 once. Repeat procedure
4 for each computer that will share the printer with the print server. It takes less
than 5 minutes to configure and test each computer.
On the PS110/PS113 Resource CD, you will find a Reference Manual containing more detailed
information about installation, troubleshooting, and configuration.
Thank you for purchasing a
NETGEAR PS110 or PS113 Print
Server. With this print server you can
share your printer with all the
computers in your home or office that
run Microsoft® Windows
Macintosh.
PS110/113
This installation guide shows you how
Print Server
to connect the print server to your
printer and configure it to use with
or
®
1