Setup The Print Server - NETGEAR PS101 Installation Manual

Install Printer Server Software and
3
3

Setup the Print Server

The PS101 comes with several software components that allow you to set up the
print server and use administrative tools. You should install all the software onto one Windows
computer to act as the print server administrator. For the other computers, only install the
NETGEAR Add Printer Wizard as described in procedure 4.
3. For the administrative computer, install all components.
Note: If this computer will just use the printer, only select the NETGEAR Add
Printer Wizard. See procedure 4: Configure a Computer To Access the Print Server
for details.
4. Click .
Finish
To set up the print server:
1. Click . Point to
Start
Setup Wizard.
2. Follow the instructions in the installation wizard to set up the print server.
\If you have questions, click
4
To install the NETGEAR Print Server software:
1.
2.
and click
Programs
for information about a specific screen.
Help
Insert the PS101 Printer Server Resource CD in
the CD-ROM drive. NETGEAR Print Server
Software Installation wizard starts up
automatically. If it doesn't, double-click
, double-click your CD-ROM drive,
Computer
and double-click
Setup.exe
Follow the instructions in the installation wizard
to install the software.
NETGEAR Print Server>NETGEAR Print Server
My
.