Making a call
To display the Auto Dial number:
œ
ç
Ring Again
If you receive a busy tone or if the person you are trying to reach does not
answer, Ring Again automatically redials the number and notifies you
when that person is free or uses their set.
Note: Ring Again applies to calls within your office or private network.
To use Ring Again:
¶
¶
28
1. Press Display.
Note: On an MSL-100 system, press
Inspect.
2. Press
Auto
Dial. The number is
displayed.
1. You dial a DN and receive a busy tone or
no answer. Press
2. Replace the handset or press Release.
When the number you want to reach is
free, or the person has used their set,
you hear the Ring Again signal.
3. Lift the handset or press a DN key.
4. Press
Ring Again
the number.
Ring
Again.
to automatically redial