Energy Saving Functions; Adjustment And Check Procedure - Elo TouchSystems ET17 XXL Series Service Manual

15 SXGA
16 SXGA
17 SXGA
18 SXGA
19 SUN
This monitor is equipped with power management features according to the Energy (formerly
E2000), EPA and VESA DPMS standards. When not in use, the power consumption is
reduced in three steps (Standby, Suspend and Off-Status). When the monitor is in power
saving mode, the display will turn back. Most graphic cards and PCs support monitors with
power management features. If you have an older PC or graphic card that does not support
power management features, please contact your dealer.
VESA's
Video
Mode
On Active
Off Blanked

ADJUSTMENT AND CHECK PROCEDURE

1. Auto balance adjustment
1.1Apply the mode 3 (fh 31KHz-fv 60Hz) with a 16 grays pattern.
1.2Pressing the MENU and select keys simultaneously then push the power switch
key on.
1.3The program will be auto off –set and gain with save.
2. Display tilt adjustment & Inspection
2.1 Apply the mode 3 (fh31KHz-fv60Hz) with a full pattern.
2.2 Confirm the display tilt≦0.5mm.
3. White Balance Alignment & Inspection
3.1 Apply the mode 3 (fh31KHz,fv60Hz).
3.2 Press the Auto key of the OSD menu.
3.3 Adjustment the brightness and contrast to Max position.
3.4 Turn the monitor off , same process the menu key then turn the monitor on to inset
temperature mode ,selection the Auto Balance for Auto Adjustment the 6500
temperature with confirm the 5500
1280×1024
1280×1024
1152×864
1280×960
1024×768

ENERGY SAVING FUNCTIONS

H-Sync V-Sync
Yes Yes
No No
。
K and 7500
64.000
80.000
67.500
60.000
52.450
Power
Used
Typical 46 watts
＜ 5 watts
。
K ,9300
- -
41
60 108.000
75 135.000
75 108.000
60 108.000
65 28.322
Power
Saving (%)
0
91
。
K of temperature.
。
K