Elo TouchSystems ET17 XXL Series Service Manual page 16

STEP 1-Routing the Cables
• Feed the cables through the cable port holes. Do not remove the rear cover.
STEP 2-Connecting the Video Cable
CONNECTIONS ON UNDERSIDE
FEMALE DVI-D FEMALE 15-PIN
VIDEO CONNECTOR VIDEO CONNECTOR
• Tilt the screen up and back to access the connection ports.
• Connect the 15-pin video cable (the ferrite bead end) to the video port on your PC.
• Connect the other end of the video cable to the video connector on your touchmonitor by
routing the cable through the hole in the stand.
• Secure the cable to your touchmonitor and PC by turning the screws on the connector
clockwise.
VIDEO CABLE
- 13 -
VIDEO PORT