Elo TouchSystems ET17 XXL Series Service Manual page 6

computer.
2.4.1.2 To ensure compliance, use only the provided manufacturer-approved line
cord.
2.4.1.3 The user is cautioned that changes or modifications to the equipment not
expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
2.4.2 If this equipment appears to cause interference with radio or television reception, or
any other device:
2.4.2.1 Verify as an emission source by turning the equipment off and on.
2.4.2.2 If you determine that this equipment is causing the interference, try to
correct the interference by using one or more of the following measures:
• Move the digital device away from the affected receiver.
• Reposition (turn) the digital device with respect to the affected receiver.
• Reorient the affected receiver's antenna.
• Plug the digital device into a different AC outlet so the digital device and
the receiver are on different branch circuits.
• Disconnect and remove any I/O cables that the digital device does not
use. (Unterminated I/O cables are a potential source of high RF emission
levels.)
• Plug the digital device into only a grounded outlet receptacle. Do not use
AC adapter plugs. (Removing or cutting the line cord ground may
increase RF emission levels and may also present a lethal shock hazard
to the user.)
If you need additional help , consult your dealer, manufacturer, or an experienced radio
or television technician.
"This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada."
"This application of this monitor is restricted to special controlled luminous environment.
This screen surface trend to reflect annoying light of lamps and sunlight. To avoid these
reflections the monitor should not be positioned in front of a window or directed to
luminaries. The monitor is in compliance with Reflection Class III according to ISO
9241-7."
- 3 -