Installing The Driver Software - Elo TouchSystems ET17 XXL Series Service Manual

Elo TouchSystems provides driver software that allows your touchmonitor to work with your
computer. Drivers are located on the enclosed CD-ROM for the following operating
systems:
• Windows XP
• Windows 2000
• Windows Me
• Windows 98
• Windows 95
• Windows NT 4.0
Additional drivers and driver information for other operating systems are available on the Elo
TouchSystems web site at www.elotouch.com. Your Elo touchmonitor is plug-and-play
compliant. Information on the video capabilities of your touchmonitor is sent to your video
display adapter when Windows starts. If Windows detects your touchmonitor, follow the
instructions on the screen to install a generic plug-and-play monitor.
Refer to the appropriate following section for driver installation instructions.
Installing the Serial Touch Driver Installing the Serial Touch
Driver for Windows XP, Windows 2000, Me, 95/98 and NT 4.0
NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install
the driver.
• Insert the Elo CD-ROM in your computer's CD-ROM drive.
• If the AutoStart feature for your CD-ROM drive is active, the system automatically detects
the CD and starts the setup program.
• Follow the directions on the screen to complete the driver setup for your version of
Windows.
• If the AutoStart feature is not active:
• Click Start > Run.
• Click the Browse button to locate the EloCd.exe program on the CD-ROM.
• Click Open, then OK to run EloCd.exe.
• Follow the directions on the screen to complete the driver setup for your version of
Windows.
Installing the Serial Touch Driver for MS-DOS and Windows 3.1
You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to
continue using your mouse along with your touchmonitor in DOS.
To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below:
• Insert the Elo CD-ROM in your computer's CD-ROM drive.
• From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM
(your CD-ROM drive may be mapped to a different drive letter).
• Type install and press Enter to start the installation.
• Align the touchscreen.

Installing the Driver Software

-
30
-