Elo TouchSystems ET17 XXL Series Service Manual page 30

• Connect the female end of the serial (RS-232) cable to the serial port on your PC, or
connect the USB touchscreen cable to the USB touchscreen connector on the back of
your touchmonitor.
• Connect the male end of the cable to the serial touchscreen connector on your
touchmonitor, or connect the other end of the USB touchscreen cable to your PC.
• Secure the cable to your touchmonitor and PC by turning the screws on the connector.
STEP 3-Connecting the OSD Remote Cable
• Connect the 6-pin Remote OSD DIN cable to the black Remote OSD port of the monitor.
STEP 4-Connecting the Power Cable
- -
27