Native Resolution - Elo TouchSystems ET17 XXL Series Service Manual

The native resolution of a monitor is the resolution level at which the LCD panel is designed
to perform best. For the Elo LCD touchmonitor, the native resolution is 1280 x 1024 for the
SXGA-17 inch size. In almost all cases, screen images look best when viewed at their native
resolution. You can lower the resolution setting of a monitor but not increase it.
Input Video
640x480 (VGA)
800x600 (SVGA)
1024x768 (XGA)
1280x1024 (SXGA)
The native resolution of an LCD is the actual number of pixels horizontally in the LCD by the
number of pixels vertically in the LCD. LCD resolution is usually represented by the following
symbols:
VGA
SVGA
XGA
SXGA
UXGA
PRESET AND USER DEFINED GRAPHIC MODES
The following table lists the factory preset graphic modes and their resolutions and
frequencies. For all these graphic modes all image adjustments (width, height, position. Etc.)
are already optimally configured.
You can save up to 9 additional settings. If you use a different resolution or one of the given
resolutions with other frequencies, you can adjust the image until it is perfectly displayed. If
you switch back to this resolution after changing modes (i.e. by running the same software),
the values you saved for image size, position, etc., will automatically be recalled (that is, the
monitor "remembers" your settings).

NATIVE RESOLUTION

640x480
800x600
1024x768
1280x1024
1600x1200
17" LCD
Transforms input format to 1280x1024
Transforms input format to 1280x1024
Transforms input format to 1280x1024
Displays in Native Resolution
- -
38