Operation - Elo TouchSystems ET17 XXL Series Service Manual

1.About Touchmonitor Adjustments
Your touchmonitor will unlikely require adjustment. Variations in video output and
application may require adjustments to your touchmonitor to optimize the quality of the
display.
For best performance, your touchmonitor should be operating in native resolution, that is
1280 x 1024 at 80k-75 Hz. Use the Display control panel in Windows to choose 1280 x
1024 resolution.
Operating in other resolutions will degrade video performance. For further information,
please refer to Page 38.
All adjustments you make to the controls are automatically memorized. This feature saves
you from having to reset your choices every time you unplug or power your touchmonitor
off and on. If there is a power failure your touchmonitor settings will not default to the
factory specifications.
2.Using the On-Screen Display (OSD) Menus (ET172XL-XXWH-X)
All adjustments are made by using the on-screen display (OSD) menus. All menu items can
be selected by using the buttons on the side bezel.
NOTE: OSD menu default is enabled.
Side Bezel Buttons (ET172XL-XXWH-X)
Control
1
MENU Menu
◤
Brightness/Plus/
2
Clockwise
◢
MUTE/Minus
3
Counter-clockwise

OPERATION

Function
Display/Exits the OSD menus
1. Adjust brightness of the OSD.
2. Increase value of the adjustment item.
3. Select item clockwise.
1.Enable/Disalbe MUTE function
2. Decrease value of the adjustment item.
3. Select item counter-clockwise.
- -
33