Elo TouchSystems ET17 XXL Series Service Manual page 45

x : 0.313 ±0.015
y : 0.329 ±0.015
3.5 Confirm the brightness, IntelliTouch :225cd/m
4. Mode Auto Adjust
4.1 Apply preset mode1~mode 19, with press select key to Adjust confirm the horizontal
center ≦1 dot. Vertical center ≦ 1 line and not any appearance.
5. Brightness check
5.1 Apply the signal mode16 (fh 80KHz, fv 75Hz) with a full white pattern.
5.2 Confirm the Brightness more than IntelliTouch :225cd/m
2
cd/m typical. (ET172XL); 260 cd/m
(ET17X7L).
6. Image Adjustment and Check
6.1 Apply the signal mode1 to mode19 signal with a full white pattern.
6.2 Selects the preset mode from mode1 to mode19.
Press the Auto function of the OSD menu for Automatically settings the image
parameters.
6.3 Confirm the Display image position . H-Position ≦1 dot, V-Position ≦1 Line.
7. Power saving check
7.1 Off mode H-Sync and V-Sync off ≦5W.
7.2 Normal ≦46W.
Power saving operation is done at least less than specified value in the list.
8. Audio Check
8.1 Apply the signal mode 16fh (80KHz, Fv 75Hz) with a windows on your screen.
8.2 Apply a standard sound for PC of music software.
8.3 Selects the Audio function of the OSD menu for confirm the volume.
2
typical, AccuTouch :188 cd/m
2
typical, AccuTouch :185
2
typical. AccuTouch : 216 cd/m
- -
42
2
typical
2
typical