Advertisement
Section 4: Operation
Power
The touchscreen display ships in the ON state.
To turn the touchscreen display on or off, attach the OSD remote via the RJ45 connector and press the touchscreen display power button on the OSD remote once.
The power status LED on the OSD remote functions according to the following table.
Touchscreen Display/Computer Module Status
OFF
SLEEP
ON
The system consumes low power when in SLEEP and OFF modes. For detailed power consumption specifications, refer to technical specifications on the Elo
website http://www.elotouch.com
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a keyboard key).
To improve reliability and reduce power consumption, disconnect the AC power cable from the monitor when long periods of disuse are planned.
Touch
Your touchscreen display is factory-calibrated and should not need manual calibration (unless the input video is not fully scaled to the native resolution, or the touch
experience needs to be calibrated to a specific user).
LED Status
OFF
PULSING
ON
User Manual: ET1099L Touchscreen
UM600770 Rev A, page 10 of 30
Advertisement
