Advertisement
Section 4: Operation
Power
The touchscreen display ships in an ON state.
To turn the touchscreen display on or off, press the touchscreen display power button on the OSD
controller once. The power status LED on the OSD controller functions according to the following
table.
Touchscreen Display/Computer Module Status
OFF
SLEEP
ON
The system consumes low power when in SLEEP and OFF modes. For detailed power consumption
specifications, refer to technical specifications on the Elo website http://www.elotouch.com
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable from the monitor when long periods of disuse are planned.
Touch
Your touchscreen display is factory-calibrated and should not need manual calibration (unless the input video is
not fully scaled to the native resolution, or the touch experience needs to be calibrated to a specific user).
LED Status
OFF
PULSING
ON
User Manual: ET1598L
UM60119 Rev A, page 10 of 23
Advertisement
