Example circuit diagrams
Contents of this chapter
This chapter contains two example circuit diagram sets. The diagram sets include:
•
ACS880-304LC...+A019 frame 1×D8D, analog input AI2 set for charging, no FDCO-01
DDCS communication module in use, direct fan control though XRO3 from control
unit
•
ACS880-304LC...+A019 frames 2×D8D, FDCO-01 DDCS communication module
(inverter unit – supply unit communication) in use, CIO-01 board for cabinet fan
control
and with
•
internal charging circuit (ABB charging kit inside supply unit cubicle)
•
external 115/230 V AC control and fan supply organized by the cabinet builder
•
cabinet fan
•
customer terminal connections (in the circuit diagrams referring to ABB SACE
Emax 2 main breaker)
•
ZCU-14 control unit.
Notes:
•
The IO diagram in section
settings of the ACS880 diode supply control program. The default parameter
settings and IO connections are valid for the supply units without the charging
circuit.
•
These diagrams do not necessarily match the installation-specific circuit diagrams
of a tailor-made cabinet-installed unit.
The purpose of these diagrams is to help in:
Default I/O connection diagram
Example circuit diagrams 153
14
shows the default IO