40 Cabinet construction
A temperature sensor integrated into the control unit supervises the board operating
temperature. In case of overtemperature, the control program generates a warning
or trips the supply unit on a fault.
The module has its own thermal switch for temperature supervision. See
Module
temperature supervision (page
17).
Pipe routing
This section includes pipe routing examples for the supply unit cabinets. See also
section
Internal cooling circuit (page
109). It describes cooling-systems for cabinet-built
ACS880 liquid-cooled multidrives. Pipe routing example drawings show also the drain
pipes. For the liquid-cooling component offering for D8D supply unit cabinets, see
the ordering information.