100 Ordering information
Explosion exhaust kit (for Rittal VX25 enclosures)
The explosion exhaust plate acts as a pressure relief vent in case of arcing inside the
cubicle. This part is installed on the roof of the cabinet.
Used with ...
400/600/800mm
1 kit per cubicle
VX25 enclosure
AC-side components
■
Lead-through kit for bottom plate
Cable entry kit, to be installed on the bottom plate of the enclosure, contains four
60 mm diameter inlets for cables with grommets, wire meshing for 360° grounding,
and a strain relief bracket.
Note: In 400 mm Rittal VX25 cabinets, the maximum number of the cable entries of
the supply unit is 8. If you need all 8 cable entries for power supply cables, you cannot
use standard Rittal VX25 bottom plates for entering charging and control cables.
Used with ...
All enclosure
1 per module
types
(minimum)
Qty
Ordering code
68797560
Qty
Ordering code
3AXD50000004385
Kit code
Illustration
-
Instruction code: 68834341
Kit code
A-468-8-441
Instruction code:
3AXD50000004817
Illustration