Table of Contents
Advertisement
Cooling
Cooling method: Liquid cooling
Materials
Module
Package
Internal cooling circuit
Disposal
Standards
See ACS880 liquid-cooled multidrive cabinets and modules electrical planning
instructions [3AXD50000048634 (English)].
Markings
See ACS880 liquid-cooled multidrive cabinets and modules electrical planning
instructions [3AXD50000048634 (English)].
Disclaimer
Generic disclaimer
￭
The manufacturer shall have no obligation with respect to any product which (i) has
been improperly repaired or altered; (ii) has been subjected to misuse, negligence or
accident; (iii) has been used in a manner contrary to the manufacturer's instructions;
or (iv) has failed as a result of ordinary wear and tear.
Cybersecurity disclaimer
￭
This product can be connected to and communicate information and data via a network
interface. The HTTP protocol, which is used between the commissioning tool (Drive
Composer) and the product, is an unsecured protocol. For independent and continuous
Busbars are made of tin plated copper sheet.
The material of the package is: Plywood support, plywood box with metal
corners, PET straps or screws.
The package consists of a plywood sleeve, bottom and top element, and of
a plywood support. The plywood support is attached onto the box bottom
with nails, screws or staples. The product is screwed onto the support to
keep it in position inside the package. Protection against conditions causing
corrosion is achieved by wrapping the product in VCI sheet. Packaging is se-
cured with screws or plastic straps.
See chapter
Internal cooling circuit (page
The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and pre-
cious metals can be recycled as material. Plastics, rubber, cardboard and
other packaging material can be used in energy recovery. Printed circuit
boards and large electrolytic capacitors need selective treatment according
to IEC 62635 guidelines. To aid recycling, plastic parts are marked with an
appropriate identification code.
Contact your local ABB distributor for further information on environmental
aspects and recycling instructions for professional recyclers. End of life
treatment must follow international and local regulations. See
installed drives and multidrives modules recycling instructions and environ-
mental information (3AXD50000153909
Technical data 129
109).
ACS880 cabinet-
[English]).
Advertisement
Table of Contents
