Showven SPARKULAR JET User Manual page 7

3. Setting Menu
Press "MENU" switch through setup menu.
Options Range
Set DMX
1-512
Address
Material
Large/Medium/Small
Select
Manual Clear On/Off
4. Advanced Menu:
Press "MENU" switch through setup menu.
Options Range
Set
480-620
Temperature
Auto Heat On/Off
Factory
Mode
Mode/ User
Selection
Mode
Standby Switch On/Off
Ext. Ignite On/Off
Feeding Test On/Off
Fan Test On/Off
Tip Over Error ON/OFF
*Please don't change default value without engineer's suggestion from SHOWVEN
Default
Set DMX address. Each machine occupy two
1 DMX channels. If controlled by Host Controller,
please assign a unique address for each machine
Large Please select based on the consumable you use
Clear material manually. Please be careful, do
OFF
NOT close to the nozzle.
Default
580 Set inner core temp
ON: machine will heating up and pressurize
automatically when power on machine
ON
OFF: Need to manually turn on heating up and
pressurize on DMX console
Factory mode is for engineer only. When in Factory
User Mode mode machine can't controlled by DMX console/host
controller
Standby function. When ON, the machine can firing
OFF
only when heating up was finished
When use fireworks firing system to firing the
OFF
machine. Customized design for fireworks customer
Test the feeding structure and feeding motor
Test the blowing fan
OFF Tilt function switch
Explanation
Explanation
®