Analyzer Standard Hardware Features - ABB NGC8200 User Manual

Helium Carrier
Medium
Analysis time
Calibration/validation
streams
Sample streams
Construction
Installation time
Mounting
NGC8200 and PGC1000
dimensions
Notes:
1. Usually experienced at startup. Use this for power supply sizing requirements (includes approx.
20% buffer and is calculated for maximum allowable power supply voltages).
2. At recommended AC power supply voltage. Highly temperature dependent, with feed-through
heater operating continuously. Usually occurs at only the coldest ambient operating temperature, i.e.,
0 °F (-18 °C).
2.1

Analyzer standard hardware features

The analyzer features a rugged, field-ready design. Hardware features include:
 Enclosure
 Cast aluminum housing with six exterior hubs
 Powder coating
 Weatherproof construction
 Modular design (see
 Digital controller assembly
 Analytical module with compact design and single bolt replacement
 Feed-through assembly with flame path arrestors
 Termination panel
 Electronics
 32-bit digital controlling electronics (no analog control loops)
 Low power operation
 Dual digital carrier pressure regulation
 Digital temperature control
 Digital detector electronics
 Low EMI/RFI design
 Operates on Windows CE
 Auto-start with diagnostics
 Factory calibrated
1 2 | N G C8 20 0 A N D PG C 10 0 0 US ER MA N UA L | 21 01 51 0MN A H
Consumption rate: 12 ml/minute typical to 20 ml/minute maximum
800 to 1500 Btu per standard Cubic Foot (29.8 to 44.6
megajoules/meter 3 ) with less than 100 PPM H2S
Approx. 5 minutes; interval between cycles is adjustable
Up to 2 dedicated (reduces sample stream for each dedicated
calibration streams). Must use dedicated stream(s) for Auto-Cal
feature.
Up to 4 (with manual calibration streams)
NEMA/Type 4X (IP56)
Aluminum Alloy with white polyester powder coating.
Explosion-Proof, see specification sheet for certifications.
Requires 2-3 hours for installation, minimum 8 hours run time for
repeatability.
Pipe run, free-standing pipe, shelf, and environmental enclosure
Width
US 9.5 inches
Metric 241.3 mm
Figure 2-1)
Height Depth
8.82 inches 15.64 inches 29 lbs.
224.0 mm 397.3 mm
Weight
10.8 kg