Table of Contents
Advertisement
The programme will resume. Water is drained, laundry is spun and the programme is completed.
If the programme has not reached the spinning step, you can change the speed without
switching the machine to Pause mode.
4.9 Delayed Start
With the Delayed Start function the startup of the programme may be delayed up to 3, 6 or 9 hours.
Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the
clothes.
1. Open the loading door, place the laundry and put detergent, etc.
2. Select a washing programme and spin speed.
3. Set the desired time by pressing the Delayed Start button. When the button is pressed once, 3 hours
delayed start is selected. When the same button is pressed again, 6 hours delay is selected, and when
it is pressed for the third time, 9 hours delayed start is selected. If you press the Delayed Start button
once again, Delayed Start function will be canceled.
4. Press Start / Pause button. Previous delayed start time light turns off and next delayed start time
light turns on after every 3 hours.
5. At the end of the countdown, all delayed start lights will turn off and the selected programme will
start.
You can switch the machine to pause mode and add laundry during the delayed start period.
Changing the delayed start period
If you want to change the time during countdown, you will need to cancel the programme and set the
delay time again.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme immediately:
1. Turn the Programme Selection knob to any programme. Thus, Delayed Start function will be canceled.
The End/Cancel light flashes continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.
4.10 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
4.11 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any
changes in a running programme.
If the Programme Selection knob is rotated when the child lock is active, "Child Lock Enabled LED" will
flash 3 times. The Child Lock does not allow any change in the programmes or the selected speed.
Even if another programme is selected with the Programme Selection knob while the Child Lock is
active, previously selected programme will continue running.
When the Child Lock is active and the machine is running, you can switch the machine to Pause mode
without deactivating the Child Lock by turning the Programme Selection knob to On / Off position.
When you turn the Programme Selection knob afterwards, the programme will resume.
To activate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds. While you are holding for 3 seconds, the
"Child Lock Enabled LED" will flash. You can release the buttons when the LEDs become permanently on.
To deactivate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds while any programme is running. While
you are holding for 3 seconds, the "Child Lock Enabled LED" will flash. You can release the buttons
when the LED turns off completely.
In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob
to On / Off position when no programme is running, and select another programme.
Child Lock is not deactivated after power failures or when the machine is unplugged.
4.12 Progress of programme
Progress of a running programme can be followed from the Programme Follow-up indicator. At
the beginning of every programme step, the relevant indicator light will turn on and light of the
completed step will turn off. You can change the speed settings without stopping the programme flow
44 / EN
Washing Machine / User's Manual
Advertisement
Table of Contents
