Step 2 - Modem Configuration - NetComm NB4 User Manual

Step 2 - Modem Configuration

In Step 2, you log directly into the configuration page of the NB4 ADSL Modem Router and
configure the basic settings for your Internet connection. Your ISP should provide you with the
necessary information to complete this step.
The settings that you most likely need to change to access the internet are grouped onto a single
Quick Configuration page.
To configure your NB4 ADSL Modem Router follow the steps below:
Note: If your computer's Ethernet interface is not set to use DHCP or you have trouble
accessing/configuring your NB4, see instructions overleaf "Computer Hardware
Configuration".
1. Insert the NetComm NB4 CD into your CD drive. The NB4 ADSL Modem Router autorun
screen will appear. Click on Configure NB4.
(Alternatively, if the CD-Rom is not available, you can open a web browser and type
http://192.168.1.1 in the location bar to access the NB4's setup screen directly.)
2. The logon page will be displayed. Enter the NB4's username and password.
The default username is admin.
The default password is password.
Click on OK.
3. The Quick Start - login settings page will be displayed.
YML733 Rev1
www.netcomm.com.au
NB4 User Guide
9