4. Under the User ID heading, enter the Username that your ISP has provided. In the
password field, enter the password that your ISP has given you.
5. Leave the Protocol, VPI and VCI settings as default unless advised to change them by
your ISP.
6. Click on the Connect button to test the settings.
7. If the test was successful, then click "Save Settings". If it failed, please try again by clicking
on the "Connect" button a second time. Also, check your settings to ensure they are
correct.
8. You should now be able to access the Internet with a web browser, email client or other
Internet application.
NB4 User Guide
10
YML733Rev1
www.netcomm.com.au