Management Ip - NetComm NB4 User Manual

Management IP

The Management IP is the IP address of your NB4 on your local network. This IP address is
specified on all computers on your network as the Gateway IP address. The Management IP
address is also the IP address you type into your browser location bar to configure your NB4.
The Management IP address is usually 192.168.1.1 but you can change it to another suitable
number (e.g. 192.168.0.1 or 10.0.0.1 or 172.16.1.1) to suit any existing network devices you
already have installed. The NetMask describes how big your network is, the default
255.255.255.0 will allow for 253 computers and generally does not need to be changed unless
to suit existing network requirements.
Note: If you change your Management IP address the DHCP server in your NB4 will
automatically change the IP address range (DHCP pool) it hands out accord-
ingly.
IP Address:
Netmask:
Default Gateway:
Host Name:
Domain Name:
Physical Port:
Apply:
NB4 User Guide
24
Private IP address for connecting to a local private network (Default:
192.168.1.1).
Netmask for the local private network (Default: 255.255.255.0).
This field is optional. Enter in the IP address of the router on your
network.
Required by some ISPs. If the ISP does not provide the Host name,
please leave it blank.
www.dynsns.org will provide you with a Domain Name. Enter this name
in the "Domain Name" field.
There are five kinds of mode for data transfer (Auto)(10/Half Du-
plex)(10/Full Duplex)(100/Half Duplex)(100/Full Duplex).
Click Apply to save the changes.
YML733Rev1
www.netcomm.com.au