Quick Start Settings - NetComm NB4 User Manual

Adsl 4-port modem router

Hide thumbs Also See for NB4:

Table of Contents

Quick Start Settings

After you have configured your computer and logged directly into the configuration page of

the NB4 ADSL Modem Router you will need to complete the Quick Start section. The settings

that you most likely need to change before using the device are grouped onto a single Quick

Start page.

To configure your NB4 ADSL Modem Router follow the steps below:

1. Insert the NetComm NB4 CD into your CD drive. The NB4 ADSL Modem Router autorun

screen will appear. Click on Configure NB4.

(Alternatively, if the CD-Rom is not available, you can open a web browser and type

http://192.168.1.1 in the location bar to access the NB4's setup screen directly.)

2. The logon page will be displayed. Enter the NB4's username and password.

The default username is admin.

The default password is password.

Click on OK.

3. The Quick Start - login settings page will be displayed.

4. Under the User ID heading, enter the Username that your ISP has provided. In the

password field, enter the password that your ISP has given you.

5. Leave the Protocol, VPI and VCI settings as default unless advised to change them by

your ISP.

6. Click on the Connect button to test the settings.

NB4 User Guide

YML733Rev1

www.netcomm.com.au

Table of Contents