Quick Start - NetComm NB4 User Manual

Adsl 4-port modem router

Hide thumbs Also See for NB4:

Table of Contents

Quick Start

This Quick Start provides basic instructions for connecting the NB4 ADSL Modem Router to a

computer and to the Internet.

■

Step 1 - describes setting up the hardware.

■

Step 2- shows you how to configure basic settings on the NB4 ADSL Modem Router to get

your computer connected to the Internet.

■

Step 3 - describes how to configure Internet properties on your computer(s).

This Quick Start Guide assumes that you have already established an ADSL service with your

Internet service provider (ISP). These instructions provide a basic configuration that should be

compatible with your home or small office setup. Refer to the Advanced Features section for

additional configuration instructions.

NOTE:

NetComm Technical Support for this product only covers the basic installation

and features outlined in the Quick Start section. For detailed information

regarding the advanced features of this product, please refer to the configuring

sections.

The NetComm NB4 ADSL Modem Router can be connected directly to your computer via an

Ethernet interface. If your computer has a network card (NIC) but isn't connected to a network hub

or switch, or another computer, then connect the NB4 to the network port of your PC.

Warning:

Before you begin, turn the power off for all devices. These include

your computer(s) and the NB4 ADSL Modem Router.

YML733 Rev1

www.netcomm.com.au

NB4 User Guide

Table of Contents