Mac OS 9.x
1. Click on the Apple in the toolbar, select Control Panels, and then click on TCP/IP.
2. Choose Connect: via Ethernet and Configure: Using DHCP Server.
3. Close the TCP/IP configuration box and save the changes.
Mac OS X
1. On the Dock, click on System Preferences.
2. Click on Network.
3. Confirm that Built in Ethernet is selected. From the TCP/IP tab select Configure: Using
DHCP. Click on Apply Now to save any changes and exit from the System Preferences.
NOTE:
For Windows NT 4 Configuration instructions please refer to the NB4 User
Guide located on the CD-ROM.
For detailed information regarding the advanced features of this product,
For detailed information regarding the advanced features of this product,
For detailed information regarding the advanced features of this product,
For detailed information regarding the advanced features of this product,
For detailed information regarding the advanced features of this product,
please refer to the configuring sections.
please refer to the configuring sections.
please refer to the configuring sections.
please refer to the configuring sections.
please refer to the configuring sections.
NB4 User Guide
14
YML733Rev1
www.netcomm.com.au