EVAL-IMI111T user guide
iMOTION™ MADK starter kit for IMI111T IPMs
Main features
2
Main features
EVAL-IMI111T starter kits are intended for evaluating the IMI111T series of iMOTION™ iMOTION™ IPMs. The main
features [1] of IMI111T series are:
Motion Control Engine (MCE) as ready-to-use controller solution for variable speed drives
•
Field oriented control (FOC) for permanent magnet synchronous motor (PMSM)
•
Space vector pulse width modulation (SVPWM) with sinusoidal commutation and integrated protection
•
features
Single-shunt current sensing through direct interface
•
Sensor-less operation
•
Integrated analog comparators for overcurrent protection
•
Overvoltage and undervoltage protection
•
Rotor lock protection
•
Built-in temperature sensor (Overtemperature protection)
•
Undervoltage lockout
•
Integrated minimum deadtime
•
Shoot-through prevention
•
Two different power IGBT options: 2 A/600 V, 4 A/600 V
•
Two different supply voltage options for controller: 3.3 V 5 V
•
15 V supply voltage for gate driver
•
Integrated bootstrap diode structure
•
Flexible host interface options for speed commands: UART, SPI, PWM, or analog signal
•
Class B pre-certification for MCE 2.0 firmware
•
Isolation 1500 V
1 min
•
RMS
Very compact DSO22 package
•
The main characteristics of the evaluation board are:
Nominal input voltage 110V
•
Onboard EMI filter
•
Single-shunt current sensing configuration
•
Voltage divider for DC-link voltage sensing
•
Measurement test points compatible with standard oscilloscope probes
•
Onboard debugger with 1 kV isolation for isolated communication to a PC via USB
•
NTC to reduce inrush current
•
PCB dimensions: 79.6 mm x 89.6 mm, 2 layers, 2 oz copper
•
RoHS compliant
•
User guide
– 230V
AC
AC
6 of 37
V2.1
2022-12-9