Introduction; Overview; Key Features - Infineon CPU-42A-V1 Manual

Introduction

This document describes the features and hardware details of the CPU Board XMC4200 Actuator (CPU_42A-
V1) designed to work with Infineon's XMC4200 Microcontroller. This board is part of Infineon's Hexagon
Application Kits.
1

Overview

The CPU board CPU_42A-V1 houses the XMC4200 Microcontroller and the ACT satellite connector for
application expansion. The board along with satellite cards (e.g. AUT_ISO-V1, MOT_GPDLV-V2 boards)
demonstrates the capabilities of XMC4200. The main use case for this board is to demonstrate motor control
and power conversion features of the XMC4200 device including tool chain. The focus is safe operation under
evaluation conditions. The board is neither cost nor size optimized and does not serve as a reference design.
1.1

Key Features

The CPU_42A-V1 board is equipped with the following features
 ®
XMC4200 (ARM Cortex

Connection to satellite cards via the ACT satellite connector

USB Device support via micro USB connector

CAN Transceiver with CAN Connector (SUB-D, DE-9 male)

Debug options
- On-board Debugger via the Debug USB connector
Cortex Debug connector 10-pin (0.05")
-
Cortex Debug+ETM connector 20-pin (0.05")
-

Reset push button

Boot from Embedded Flash or CAN

PowerScale Connector: Ready for power consumption analysis

6 LED's
- 3 Power indicating LEDs
- 1 User LED (P2.1)
- 1 RESET LED
- 1 Debug LED

User button connected to P14.7

Potentiometer, connected to analog input P14.4

Power supply
- Via Micro-USB connector
- Via satellite connector pins (ACT satellite cards can supply power to CPU board)
- Via Debug USB connector (Micro USB)
- RTC backup battery
Board User's Manual
™
-M4-based) Microcontroller, 256 kByte on-chip Flash, QFN-48
CPU Board XMC4200 Actuator
7
CPU_42A-V1
Overview
Revision 1.0, 2013-02-19