Mercedes-Benz AMG GT Operator's Manual page 57

54 Occupant safety
Seat belt adjustment function
®
Vehicles with PRE-SAFE : after a front seat belt
has been fastened, the automatic seat belt adjust-
ment may apply a certain tightening force. Do not
hold the seat belt tightly while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia system
( page 54).
/
Activating/deactivating seat belt adjustment via
the multimedia system
Multimedia system:
© Settings Vehicle
4 5 5
Activate or deactivate Belt adjustment.
#
Releasing seat belts
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Seat belt warning function for the driver and front
passenger
The ü seat belt warning lamp in the Instru-
ment Display is a reminder that all vehicle occu-
pants must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.
When the vehicle is switched on, the rear seat
belt status display informs you for a certain
amount of time which rear seat belt is not fas-
tened.
You can immediately dismiss the rear seat belt
status display using the back button on the left-
hand side of the steering wheel (
If a vehicle occupant unfastens a seat belt in the
rear while the vehicle is motion, the rear seat belt
status display appears again.
In addition, a warning tone may sound. In this
case, the rear seat belt status display cannot be
hidden using the back button on the left-hand side
of the steering wheel.
page 283).
/