Mercedes-Benz AMG GT Operator's Manual page 369

366 Breakdown assistance
Comply with the manufacturer's safety notes on
the sticker on the tyre inflation compressor.
Have the tyre sealant bottle replaced in a qualified
specialist workshop every five years.
Do not remove any foreign objects which have
#
entered the tyre.
1
Affix part of the TIREFIT sticker to the
#
instrument cluster within the driver's field of
vision.
Affix part 2 of the TIREFIT sticker near the
#
valve on the wheel with the defective tyre.
4
Pull plug with the cable and hose
#
of the tyre inflation compressor housing.
Push the plug of hose 5 into flange
#
tyre sealant bottle 1 until the plug engages.
Place tyre sealant bottle 1
#
into recess 2 of the tyre inflation compres-
sor.
Remove the valve cap from valve
#
faulty tyre.
Screw filling hose
#
Insert plug
#
cle.
5
out
Switch on the vehicle.
#
Switch on the tyre inflation compressor using
#
6 of
On/Off switch 3.
The tyre is inflated. First, tyre sealant is pum-
ped into the tyre. The pressure may briefly rise
head downwards
to approximately 500 kPa (5.0 bar/73 psi).
Do not switch off the tyre inflation compressor
during this phase!
7 on the
8 onto valve 7.
4 into a 12‑V‑socket in your vehi-