Mercedes-Benz AMG GT Operator's Manual page 251

248 Driving and parking
When driving with a trailer, the electrical con-
R
nection to the trailer has been correctly estab-
lished.
If a loss of tyre pressure or a defective tyre is
R
detected and displayed.
If you deactivate the Active Lane Keeping Assist
warning and the lane markings cannot be clearly
detected, it is possible that no lane-correcting
brake application takes place (
/
The system may be impaired or may not function
particularly in the following situations:
If there is poor visibility, e.g. due to insufficient
R
illumination of the road, highly variable shade
conditions, rain, snow, fog or heavy spray.
If there is glare, e.g. from oncoming traffic, the
R
sun or reflections.
If there is dirt on the windscreen in the vicinity
R
of the multifunction camera or if the camera is
misted up, damaged or obscured.
If there are no lane markings, or several
R
unclear lane markings are present for one
lane, e.g. around roadworks.
If the lane markings are worn, dark or cov-
R
ered.
If the distance to the vehicle in front is too
R
short and thus the lane markings cannot be
detected.
If the lane markings change quickly, e.g. lanes
R
branch off, cross one another or merge.
If the carriageway is very narrow and winding.
R
page 248).
Vehicles with Driving Assistance Package: if
R
the radar sensors in the rear bumper are dirty
or covered in snow and an obstacle is detec-
ted in your lane, no lane-correcting brake
application takes place.
▌Activating/deactivating Active Lane Keeping
Assist
Multimedia system:
©
4
Active Lane Keeping Assist
5
Activate or deactivate the function.
#
Settings Quick access
5 5
▌Setting Active Lane Keeping Assist
Multimedia system:
© Settings Assistance
4 5 5
Active Lane Keeping Assist
5
Setting the sensitivity
%
The availability of this function is country-
dependent.
Select Standard, Sensitive or Off.
#
Activating or deactivating the haptic warning
Select Warning.
#
Activate or deactivate the function.
DYNAMIC BODY CONTROL function
DYNAMIC BODY CONTROL continuously adjusts
the characteristics of the suspension dampers to
the current operating and driving conditions.
The damping is set individually for each wheel and
is affected by the following factors:
the road surface conditions
R
vehicle load
R
the drive program selected
R