Mercedes-Benz AMG GT Operator's Manual page 398

Position support 2 of jack
#
port point 1.
Turn ratchet 3 clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the ground.
Turn ratchet 3 until the tyre is raised a maxi-
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised (
R
Vehicles with AMG ceramic high-performance
composite braking system:
* NOTE Damage to the ceramic brake disc
when changing a wheel
Mercedes-AMG vehicles with ceramic brake
discs: during removal and repositioning of the
wheel, the wheel rim can strike the ceramic-
brake disc and damage it.
Take particular care.
#
Ask another person for assistance or use
#
4 on jack sup-
a second centring pin.
When changing a wheel, avoid applying any force
2
to the brake discs, as this could impair the level of
1 and
comfort when braking.
page 395).
/
* NOTE Damage to threading from dirt on
page 393).
/
#
#
#
#
#
Wheels and tyres 395
wheel bolts
Do not place wheel bolts in sand or on a
dirty surface.
Unscrew the uppermost wheel bolt com-
pletely.
Screw centring pin 1 into the thread instead
of the wheel bolt.
Unscrew the remaining wheel bolts com-
pletely.
Remove the wheel.