Mercedes-Benz AMG GT Operator's Manual page 208

Press catch 3 to the left and fold open
#
socket cover 7.
To charge at a mains socket, insert the mains
#
plug into the mains socket of the external
power source to the stop and set the maxi-
mum charging current if required
( page 200).
/
Insert the charging cable connector into vehi-
#
cle socket 2 to the stop. If the wallbox/
charging station is not equipped with a charg-
ing cable, insert the plug of the vehicle's
charging cable into the wallbox/charging sta-
tion socket to the stop.
Make sure that the charging cable is not taut
when inserted.
The # indicator lamp 6
5 flash orange and, as soon as the high-volt-
age battery is charged, green.
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charging
side is shown in the Instrument Display with a
charging prediction. The charging prediction
refers to the time at which the high-voltage bat-
tery will be fully charged.
%
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
%
The vehicle is equipped with an electrical fuse
which protects it against overvoltage in the
mains supply. This electrical fuse may trip dur-
ing severe thunderstorms, for example, and
may cause the fuse in the building to trip or
may interrupt the charging process. These
and socket lamp
functions protect the vehicle.
After the fuse in the building is switched on
again, the charging process resumes automat-
ically. Following an interruption in the power
supply without the fuse in the building being
tripped, it may take up to ten minutes for
charging to resume automatically.
Driving and parking 205
Ending the charging process
%
Depending on the national version, the vehicle
is equipped with one of the following vehicle
sockets.
Type 1 vehicle socket