Mercedes-Benz AMG GT Operator's Manual page 203

200 Driving and parking
recharge efficiency can be obtained at a qualified
specialist workshop.
Setting the maximum permissible charging cur-
rent for charging at a mains socket
* NOTE Overloading the mains socket due
to excessive charging current
If the charging current is too high, the fuse
could be tripped or the external mains supply
could overheat.
Make sure that the external mains supply
#
has been designed to handle the set
charging current.
For safety reasons, only use the charging
#
cable supplied with the vehicle or an
original Mercedes-Benz charging cable.
Mercedes-Benz thoroughly tests these
original charging cables for their suitabil-
ity for high-voltage charging of your vehi-
cle.
Purchase these parts at a Mercedes-
#
Benz Service Centre and obtain advice
there.
Check the maximum charging current
#
using the charging capacity shown in the
Instrument Display.
The charging cable supplied is set to a country-
specific maximum charging current value. When
charging abroad, the maximum value may exceed
the permitted value for that country.
Before charging at a mains socket, have the
#
maximum permissible charging current for the
relevant mains socket or the building inspec-
ted by a qualified electrician.
When abroad, observe the country-specific
#
laws when charging.
If you have questions concerning the charging
current or if there is a malfunction, please contact
a qualified specialist workshop.
Overview of the charging cable control panel
The charging cable control panel shows the cur-
rent status of the charging process.
1
Supply voltage indicator
2
Charging process indicator
3
Temperature monitor indicator
4
Safety system indicator
Supply voltage indicator 1
Display Meaning
Lights up white The supply voltage is
connected.