Mercedes-Benz AMG GT Operator's Manual page 221

218 Driving and parking
®
To deactivate ESP : press and hold display
#
button 1 until the road in button symbol
lights up red.
The å and ¤ warning lamps appear in
the Instrument Display.
%
®
When you deactivate ESP
I, AMG Dynamics automatically switches
to the Master level.
®
To activate ESP : press and hold display but-
#
ton 1 until the road in button symbol
lights up blue.
The å, Æ and ¤ warning lamps go
out.
If the ÷ symbol is shown with a red ! on the
®
display button, ESP is malfunctioning. Observe
the information on warning lamps and display
messages which are shown in the Instrument Dis-
play.
Function of EBD
2
Electronic Brakeforce Distribution (EBD) is charac-
terised by the following:
Monitoring and regulating the brake pressure
R
on the rear wheels.
in drive program
Improved driving stability when braking, espe-
R
cially on bends.
Function of STEER CONTROL
2
STEER CONTROL assists you by transmitting a
noticeable steering force to the steering wheel in
the direction required for vehicle stabilisation.
If you brake and both right wheels or both left
wheels are on a wet or slippery road surface, you
will receive a steering recommendation.
System limits
STEER CONTROL may be impaired or may not
function in the following situations:
®
ESP
R
®
ESP
R
The steering is malfunctioning.
R
is deactivated.
is malfunctioning.
®
If ESP is malfunctioning, you will be assisted fur-
ther by the electric power steering.
HOLD function
▌HOLD function
The HOLD function holds the vehicle at a stand-
still without requiring you to depress the brake
pedal, e.g. while waiting in traffic.
The HOLD function is only an aid. The responsibil-
ity for the vehicle safely standing still remains with
the driver.
System limits
The HOLD function is only intended to provide
assistance when driving and is not a sufficient
means of safeguarding the vehicle against rolling
away when stationary.
The incline must not be greater than 30%.
R