Controls And Functions; On / Off Switch; Source Selection - T+A PA 1100 E User Manual

Controls and functions

1 On / Off switch

2

Source selection

Button
IN 1
USB
IN 2
S/P-DIF
IN 3
OPT
IN 4/P
HDMI
IN 5/R
BT
34
Pressing this button briefly switches the device on and off. When the unit is switched
on the indicator LED above the button glows.
Please note the hints in the chapter „Automatic power down function" on page 50.
By pressing a source selection button, one of the connected signal sources is selec-
ted as the listening source. The LEDs above the source selection buttons indicate
which source is currently being listened to by means of different colours. Press the
corresponding button repeatedly until the desired input is selected.
Source Indicator
IN 1 red
USB blue
IN 2 red
S/P-DIF 1 blue
S/P-DIF 2 green
IN 3 red
OPT 1 blue
OPT 2 green
IN 4 /P red
HDMI 1 blue
HDMI 2 green
HDMI ARC violett
IN 5/R red
BT blue
Flashes when no device is connected
Flashes when no signal is detected
Flashes when no signal is detected
Only with optional built-in HDMI module
Flashes when no device is connected