Appendix B Using The Transmitter Display; Components Of The Transmitter Interface; Use The Optical Switches - Emerson MICRO MOTION HFVM Series Configuration And Use Manual

Appendix B
Using the transmitter display
Topics covered in this appendix:
•
•
•
•
•
B.1

Components of the transmitter interface

The transmitter interface includes the status LED, the display (LCD panel), and two optical
switches.
B.2

Use the optical switches

Use the optical switches on the transmitter interface to control the transmitter display.
The transmitter has two optical switches: Scroll and Select.
To activate an optical switch, block the light by holding your thumb or finger in front of the
opening.
Tip
You can activate the optical switch through the lens. Do not remove the transmitter housing cover.
The optical switch indicator lights up when the transmitter senses that an optical switch
has been activated.
Table B-1:
Optical switch indicator
Solid red
Flashing red
Configuration and Use Manual
Components of the transmitter interface
Use the optical switches
Access and use the display menu system
Display codes for process variables
Codes and abbreviations used in display menus
Optical switch indicator and optical switch states
State of optical switches
One optical switch is activated.
Both optical switches are activated.
Using the transmitter display
151