Error Output - Renesas MINICUBE QB-MINI2 User Manual

8.3

Error Output

The following describes the operation and display example when an NG is displayed as a result of 8.1 Execution
of OCD Check. The message just indicates "NG", but there are various causes.
(1) The result is displayed in the dialog box. Click the [OK] button.
(2) The contents displayed in the log view window are saved in the log file.
[Log view window]
[Log file]
Execution time Execution time
Clock status Clock status
V V
DD DD
Hardware Hardware
version version
In this NG example, the error "Target Power: OFF" is detected.
Shutdown of the power supplied to the QB-78K0SKX1-DA is detected. This is because the check is performed
without turning on the power to the QB-78K0SKX1-DA.
CHAPTER 8 OCD CHECK FOR 78K0S MINICUBE+
tt:mm:ss tt:mm:ss
Target Clock: 10.00MHz [OK] Target Clock: 10.00MHz [OK]
status status Target Power: OFF Target Power: OFF
MINICUBE 78K0S 2000 x xx.xx MINICUBE 78K0S 2000 x xx.xx
Control Board Control Board
Emulator Test End Emulator Test End
User's Manual U18591EJ2V0UM
(1)
0001 xx.xx 0001 xx.xx
47