Table of Contents
Advertisement
(4) Clock select area
Select with the radio button the clock supplied to the emulator.
• internal:
When a clock mounted in the emulator is used.
• socket:
When a clock mounted in the CLK1 socket of the MINICUBE2 78K0-OCD board and a
clock mounted in the CLK1 socket of the 78K0 MINICUBE or 78K0S MINICUBE+ are used.
• Main OSC(MHz): Input the target system clock frequency when "MINICUBE2 V850" is selected.
(5) Internal ROM Security setting area
To set the ID code, select the "ID Code" check box; otherwise, the ID code is handled as 0xFF.
If "MINICUBE2 V850" is selected, this area is available only when a debug monitor program has been written
to the target device.
This area is unavailable if "MINICUBE2 78K0S" or "78K0S MINICUBE+" is selected for the emulator mode.
(6) [Log file] button
Specifies the file to which the check log will be output (log file).
The location for saving the log file can be changed by clicking the [Log file] button. The log file is created as
"IEOCDUTL.log" in a temporary folder by default. Normally, the temporary folder is specified in the tmp or
temp environmental variable.
(7) [Test] button
Starts checking. The checked items and their result are output to the log file.
(8) Log view window
Displays the check result. The contents displayed in this area are also output to the log file that is specified
using the (6) [Log file] button.
(9) [Clear] button
Clears the log view window. The contents output to the log file are not cleared.
(10) [Exit] button
Terminates the OCD Checker.
(11) System menu
Version can be checked by clicking "About OCD Checker..." on the System menu.
Remark
Settings for the OCD Checker are maintained when the OCD Checker is started the next time,
except for the setting in the Internal ROM Security setting area.
CHAPTER 2 INSTALLATION AND STARTUP
User's Manual U18591EJ2V0UM
13
Advertisement
Table of Contents
