Table of Contents
Advertisement
No.
Error message and action
7
Log file write error
The specified log file cannot be accessed.
→ Confirm that the folder, path, and file are write-enabled.
8
Test Rom Command(xxH) Error, Monitor Command(xxH) Error
Communication between the target device on the self-check board and MINICUBE has failed.
→ The cause may be a problem in the electrical specifications of the cable or the self-check board, or the USB
driver may not be operating normally.
Confirm the connection and restart Windows on the host machine.
9
Write Memory, Read Memory, Data verify error
The internal RAM cannot be accessed. The target device on the self-check board may be damaged.
→ Exchange the target device.
10
_Flash Env Error, _Flash Get Info Error, _Flash Block Blank Check Error, _Flash Block Erase Error, _Flash Word
Write Error, _Flash Block Verify Error, _Flash Word Read Error, Data Verify Error
An error occurred while writing to the flash memory.
→ The cause may be the security flag setting, so clear the security flag setting via the QBP.
The target device on the self-check board may be damaged, so exchange the target device.
11
Break Timeout, ERROR: SP Break Test, ERROR: Execute Break Test1, ERROR: SFR Access Break Test,
ERROR: Read Access Break Test1, ERROR: Read Access Break Test2, ERROR: Write Access Break Test1,
ERROR: Write Access Break Test2, ERROR: Step Break Test, ERROR: Execute Break Test2
The target device on the self-check board may be damaged, so exchange the target device.
CHAPTER 7 OCD CHECK FOR 78K0 MINICUBE
User's Manual U18591EJ2V0UM
(2/2)
43
Advertisement
Table of Contents
