Error Output - Renesas MINICUBE QB-MINI2 User Manual

7.3

Error Output

The following describes the operation and display example when an NG is displayed as a result of 7.1 Execution
of OCD Check. The message just indicates "NG", but there are various causes.
(1) The result is displayed in the dialog box. Click the [OK] button.
(2) The contents displayed in the log view window are saved in the log file.
[Log view window]
[Log file]
Execution time Execution time
Clock status = NG (error) Clock status = NG (error)
V V
DD DD
Hardware version Hardware version
In this NG example, the clock status 0.00MHz is detected as an error.
The clock frequency 0.00 MHz is detected. This is because no oscillator is mounted in the CLK1 socket but
"socket" is selected in the clock select area.
CHAPTER 7 OCD CHECK FOR 78K0 MINICUBE
status status
User's Manual U18591EJ2V0UM
(1)
tt:mm:ss tt:mm:ss
Target Clock: 0.00MHz [NG] Target Clock: 0.00MHz [NG]
Target Power: 4.9V [OK] Target Power: 4.9V [OK]
MINICUBE 78K0 4000 x xx.xx MINICUBE 78K0 4000 x xx.xx
Emulator Test End Emulator Test End
41