Chapter 2 Installation And Startup; When Nec Electronics Tool Is Used; Installation; Startup - Renesas MINICUBE QB-MINI2 User Manual

Ocd checker

Hide thumbs Also See for MINICUBE QB-MINI2:

User manual (180 pages)

Table Of Contents

Table of Contents

This section explains how to install and start the OCD Checker.

2.1

When NEC Electronics Tool Is Used

2.1.1

Installation

• Select the "Emulator Utilities" check box when installing CubeSuite V1.00 or later. The MINICUBE OCD

<R>

Checker is then installed automatically.

• Select the "MINICUBE Utilities Vx.xx" check box when installing ID78K0-QB V2.93 or later. The OCD Checker

is then installed automatically.

• Select the "MINICUBE Utilities Vx.xx" check box when installing ID850QB V3.20 or later. The OCD Checker is

then installed automatically.

• Select the "MINICUBE Utilities Vx.xx" check box when installing QBP V1.00 or later. The OCD Checker is then

installed automatically.

• Select the "MINICUBE Utilities Vx.xx" check box when installing ID78K0S-QB V2.82 or later. The OCD Checker

is then installed automatically.

• Select the "MINICUBE Utilities Vx.xx" check box when installing ID78K0R-QB V3.20 or later.

Checker is then installed automatically.

Caution

If multiple debuggers are installed, "MINICUBE Utilities Vx.xx MINICUBE OCD Checker" in the

[Latest Version] folder is overwritten. When an ID78K0-QB or ID78K0S-QB earlier than V3.00

is installed, the OCD Checker in the [NEC Tools32] folder is overwritten.

Remark

The MINICUBE2 diagnostic tool is installed when the OCD Checker is installed.

<R>

2.1.2

Startup

Start the OCD Checker using either of the following procedure.

• When using CubeSuite

Click the Start menu of Windows, point to "Programs", "NEC Electronics CubeSuite", "Emulator Utilities",

"<Target Device>"and then click "OCD Checker".

• When using the ID850QB, ID78K0-QB, ID78K0S-QB, ID78K0R-QB, or QB-Programmer

Start OCD Checker by using either of the following methods.

• Click the Start menu of Windows, point to "Programs", "NEC Electronics Tools", "Latest Version", and then

click "MINICUBE Utilities Vx.xx OCD Checker".

• Click the Start menu of Windows, point to "Programs", "NEC Tools32", and then click "OCD Checker". (For

an ID78K0-QB or ID78K0S-QB earlier than V3.00)