Table of Contents
Advertisement
Caution If the debugger, QBP, or MINICUBE2 diagnostic tool is running, terminate it before starting the
OCD Checker.
Remark
When an ID78K0-QB or ID78K0S-QB earlier than V3.00, a link file for startup is created in the [NEC
Tools32] and [NEC Electronics Utilities] folders.
2.2
When Tools Manufactured by Partner Companies (GHS and IAR) are Used
2.2.1
Installation
• Download MINICUBE Utilities (MINICUBE_Utilities_Vxxx.lzh) from one of the following websites.
http://www.necel.com/micro/ghs/jpn/exec/execindex.html (Japanese version)
http://www.necel.com/micro/ghs/eng/exec/ (English version)
<1> Download MINICUBE_Utilities_Vxxx.lzh into an arbitrary folder from the website.
<2> Execute MINICUBE_Utilities_Vxxx.lzh in the arbitrary folder.
<3> The following folders and files will be created in the arbitrary folder.
MINICUBE_Utilities_Vxxx
<4> Install MINICUBE_Utilities_Vxxx main unit as follows.
• If the OS is Japanese Windows, execute setup.exe in the MINICUBE_Utilities_Vxxx\Japanese\DISK1
folder and install the software according to the installer instructions.
• If the OS is not Japanese Windows, execute setup.exe in the MINICUBE_Utilities_Vxxx\English\DISK1
folder and install the software according to the installer instructions.
Caution Specify C:\Program Files\NEC Electronics Tools as an installation destination folder.
Remarks 1. The MINICUBE OCD Checker and MINICUBE2 diagnostic tool can be installed by installing
MINICUBE Utilities Vxxx.
2. GHS: Green Hills Software, Inc
IAR: IAR Systems AB
2.2.2
Startup
• Click the Start menu of Windows, point to "Programs", "NEC Electronics Tools", "Latest Version", and then click
"MINICUBE Utilities Vx.xx OCD Checker".
Caution
If the debugger, QBP, or MINICUBE2 diagnostic tool is running, terminate it before starting
the OCD Checker.
CHAPTER 2 INSTALLATION AND STARTUP
MINICUBE_Utilities_Vxxx
MINICUBE_Utilities_Document_Vxxx
readme_j.txt
readme_e.txt
User's Manual U18591EJ2V0UM
11
Advertisement
Table of Contents
