Format Of Log File - Renesas MINICUBE QB-MINI2 User Manual

7.2

Format of Log File

The following shows an example of the log file.
Execution time Execution time
Clock status Clock status
V V
DD DD
Reset status Reset status
Hardware version Hardware version
Check result Check result
• Execution time:
• Clock status:
• V
status:
DD
• Reset status:
• Hardware version:
• Check result:
Remark The version of the 78K0 MINICUBE can also be checked with the debugger. For the latest
version, consult an NEC Electronics sales representative or distributor. See QB-78K0MINI
User's Manual (U17029E) for the control code of the OCD Checker.
40
CHAPTER 7 OCD CHECK FOR 78K0 MINICUBE
status status
The time when checking was started by clicking the [Test] button.
Frequency of the selected clock
V value that is applied to the self-check board
DD
RESET pin status
[HIGH] Reset signal input from the self-check board is HIGH
[LOW] Reset signal input from the self-check board is LOW
Version of each hardware.
[Program Download]
[Run Test] Result of executing and stopping the program
[Flash Erase] Erasure result of flash memory in the target device (self-check
board)
User's Manual U18591EJ2V0UM
tt:mm:ss tt:mm:ss
Target Clock: 5.00MHz [OK] Target Clock: 5.00MHz [OK]
Target Power: 4.8V [OK] Target Power: 4.8V [OK]
Target Reset: HIGH Target Reset: HIGH
OCD Control Code Vx.xx OCD Control Code Vx.xx
MINICUBE 78K0 4000 x x.xx MINICUBE 78K0 4000 x x.xx
Program Download: OK Program Download: OK
Run Test: OK Run Test: OK
Flash Erase: OK Flash Erase: OK
ALL OK ALL OK
Emulator Test End Emulator Test End
ID verification, result of downloading to flash memory in the
target device (self-check board)