Table of Contents
Advertisement
2.3
Explanation of Each Area
When the OCD Checker is started, the following window appears.
(11)
(7)
(6)
(8)
(1) Emulator mode select area
Select from the drop-down list the emulator mode for which target connection check is to be performed.
(2) Target Device Connection area
If "MINICUBE2 V850", "MINICUBE2 78K0S" or "MINICUBE2 78K0R" is selected for the emulator mode,
specify from the drop-down list the device file for the target device and the mode for connection with the target
system.
This menu is unavailable if an item other than "MINICUBE2 V850", "MINICUBE2 78K0S" or
"MINICUBE2 78K0R" is selected.
• Device: Select from the drop-down list the target device to be connected.
If the target device (device file) is not displayed in the list, specify the folder where the device file is
saved, using the (3) [Device file folder] button in the above window.
• Port:
Select the mode for connection with MINICUBE2 and target system from the drop-down list
(available only when "MINICUBE2 V850" or "MINICUBE2 78K0R" is selected)
(3) [Device file folder] button
This button is used for searching the folder where the device file is saved to define the device file to be
connected when "MINICUBE2 V850", "MINICUBE2 78K0S", or "MINICUBE2 78K0R" is selected. When the
device file has been installed using the device file installer (DFINDT), the saved folder is automatically
specified.
12
CHAPTER 2 INSTALLATION AND STARTUP
(3)
(1)
(4)
(2)
User's Manual U18591EJ2V0UM
(5)
(10)
(9)
Advertisement
Table of Contents
