CHAPTER 5 OCD CHECK FOR MINICUBE2 AND 78K0S MICROCONTROLLER
(6) Click the [Exit] button.
5.2
Format of Log File
The following shows an example of the log file when the check results show "OK" statuses.
Execution time
Execution time
Reset status
Reset status
Hardware version
Hardware version
Check result
Check result
• Execution time:
The time when checking was started by clicking the [Test] button
• Reset status:
RESET pin status
• Hardware version:
Version of each hardware.
• Check result:
[Program Download] ID verification, result of downloading to flash memory in the target
[Run Test]
[Flash Erase]
28
[HIGH]
Reset signal input from the target system is HIGH
[LOW]
Reset signal input from the target system is LOW
device
Result of executing and stopping the program
Erasure result of flash memory in the target device
User's Manual U18591EJ2V0UM
tt:mm:ss
tt:mm:ss
Target Reset: HIGH
Target Reset: HIGH
MINICUBE2 4100 x xx.xx
MINICUBE2 4100 x xx.xx
Program Download: OK
Program Download: OK
Run Test: OK
Run Test: OK
Flash Erase: OK
Flash Erase: OK
ALL OK
ALL OK
Emulator Test End
Emulator Test End
(6)