Format Of Log File - Renesas MINICUBE QB-MINI2 User Manual

CHAPTER 6 OCD CHECK FOR MINICUBE2 AND 78K0R MICROCONTROLLER
(6) Click the [Exit] button.
6.2

Format of Log File

The following shows an example of the log file when the check results show "OK" statuses.
Execution time Execution time
V V
DD DD
Reset status Reset status
Hardware version Hardware version
Check result Check result
• Execution time:
• V
status:
DD
• Reset status:
• Hardware version:
• Check result:
34
status status
The time when checking was started by clicking the [Test] button
V value that is applied to the target device
DD
RESET pin status
[HIGH] Reset signal input from the target system is HIGH
[LOW] Reset signal input from the target system is LOW
Version of each hardware.
[Program Download] ID verification, result of downloading to flash memory in the
target device
[Run Test] Result of executing and stopping the program
[Flash Erase] Erasure result of flash memory in the target device
User's Manual U18591EJ2V0UM
tt:mm:ss tt:mm:ss
Target Power: 3.2V [OK] Target Power: 3.2V [OK]
Target Reset: HIGH Target Reset: HIGH
MINICUBE2 4100 x xx.xx MINICUBE2 4100 x xx.xx
Program Download: OK Program Download: OK
Run Test: OK Run Test: OK
Flash Erase: OK Flash Erase: OK
ALL OK ALL OK
Emulator Test End Emulator Test End
(6)