This section describes the method to perform a simple test based on checking the connection between the QB-
78K0SMINI and QB-78K0SKX1-DA of the 78K0S MINICUBE+, using the OCD Checker.
8.1
Execution of OCD Check
Be sure to terminate the debugger before executing the OCD Checker.
(1) Connection and power application
Connect the 78K0S MINICUBE+ (with QB-78K0SMINI and QB-78K0SKX1-DA connected) or 78K0S
MINICUBE+ to the target system in accordance with QB-78K0SKX1MINI User's Manual (U17272E).
(2) Setting the OCD Checker
Refer to 2.3 Explanation of Each Area.
• Emulator mode select area:
• Clock select area:
• [Log file] button:
(3) Click the [Test] button. If an error occurs during checking, refer to 8.3 Error Output and 8.4 Action for
Error.
(3)
44
CHAPTER 8 OCD CHECK FOR 78K0S MINICUBE+
Select "78K0S MINICUBE+".
Select "internal" or "socket".
Specify the log file name and the location for saving the log file.
User's Manual U18591EJ2V0UM
(2)